Engine Mounts & Bushes

This Powerflex front arm bush is for the front of the wishbone on the Renault Clio Mk3 197 and 200. This Powerflex wishbone bush is only made in th...

These Powerflex PFR60-810 Rear Beam bushes remove unwanted movement from the rear beam under hard cornering. The purple bushes are best for road us...

PFF60-822 This Powerflex torque arm bush replaces the original rubber bush in the Upper Torque Arm on the Renault Clio 197 and 200. The Powerflex b...

PFF60-802 The Powerflex front arm rear bush kit for the Renault Clio Mk3 197 and 200 is available as a non adjustable kit or with caster adjustm...

LOWER TORQUE MOUNT (FAST ROAD) PFF60-8025P PFF60-8025P is a further 20% stiffer than PFF60-8025 being made solely in our Purple 80A durometer mater...

PFF60-821 The Powerflex upper engine mount insert is suitable for the Renault Clio Mk3 RS 197/200 models. This is an insert that fits into and fill...

PFF60-820 The Powerflex lower engine mount insert is suitable for the Renault Clio Mk3 RS 197/200 models. This is an insert that fits into and fill...

PFF60-525 The Powerflex Gearbox Mount Insert is suitable for the Renault Clio Mk3 RS 197/200 models. This is an insert that fits into and fills voi...

This Powerflex Handling Pack (PF60K-1002) fits the Renault Clio Mk3 197 RS models. If you have the later RS200 or have replaced your lower engine m...

The Powerflex Front Anti-Roll Bar Bushes are replacements for the Renault OEM bushes for all Renaultsport models. The smaller size fits the Clio Mk...

PF85K-1007 This kit is suitable for Petrol 2WD Multi-link and 4WD vehicles only. OEM Part Number: PFF85-830 Lower Engine Mount Insert fits OEM par...

FRONT UPPER RIGHT ENGINE MOUNT INSERT Diagram Ref: 21 PFF60-221 For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits ...

Fits all Megane II and 2.0L Clio III models up to May 2009. For Clio models with a spacer block and shorter bush, use PFF60-803-*. PFF60-803-20.5B...

This Powerflex front arm bush is for the front of the wishbone on the Renault Clio Mk3 197 and 200. This Powerflex wishbone bush is only made in th...

This part suits 21mm anti roll bars. This bush is half the length of the bracket and uses a spacer, for models with full bush with no spacer use PF...

PF3K-1002 Suitable for Petrol vehicle with Cast Wishbones only. included within this handling pack are the following parts: PFF3-501 Front Wishbon...

PF85K-1006 Fits Petrol models mid 2008 onwards The prices shown on our website are per bush.To get the total pack price you will need to multiple ...

LOWER ENGINE MOUNT BRACKET & BUSHES, FAST ROAD/TRACK Diagram Ref: 6 PFF19-2020P Combining a new CNC machined aluminium lower torque mount with ...

REAR SPRING UPPER ISOLATOR Diagram Ref: 26 PFF19-2026 Fits 6-speed manual and DCT transmission models only. This part is designed to limit excessi...

REAR SPRING UPPER ISOLATOR Diagram Ref: 30 PFR19-2030 PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used o...

GEARBOX MOUNTING BUSH INSERT Diagram Ref: 20  PFF60-8025 PFF60-8025 is significantly stiffer than the OE mount and recommended for standard or mil...

GEARBOX MOUNTING BUSH INSERT Diagram Ref: 22 PFF60-525 Please measure anti roll bar diameter before ordering. This polyurethane insert fits into a...

GEARBOX MOUNTING BUSH INSERT Diagram Ref: 21 PFF60-821 Please measure anti roll bar diameter before ordering. This insert fits into the voiding of...

UPPER RIGHT ENGINE MOUNT INSERT Diagram Ref: 4 PFF60-720 This is an insert to fit into and fill the voids in original mount OE numbers: 112100035R...

DOG BONE (TWISTED) ENGINE MOUNT BUSH KIT Diagram Ref: 5 PFF60-206K PFF60-206K will fit Phase 1 Petrol 172 models only & 2.0 Megane 2.0 petrol &...

DOG BONE (TWISTED) ENGINE MOUNT BUSH KIT Diagram Ref: 5 PFF60-211K Fits Phase 2 172/182 Sport. Use PFF60-206K for Phase 1 172 Sport. Fits Twingo RS...

POWERALIGN CAMBER BOLT KIT (14MM) PFA100-14 Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 14mm b...

POWERALIGN CAMBER BOLT KIT (12MM) PFA100-12 Kit contains 2 x 12.9 Steel camber bolts, tab washers and nuts. Camber adjusting bolt to replace the or...

REAR SHOCK UPPER MOUNT PFR60-311 PFR60-311BLK Powerflex bushes facilitate your car's grip on the road and improve chassis performance by managing e...

The Renault Megane wishbone bushes are under heavy loads when the car is driven hard. These Powerflex bushes keep the Renault Megane suspension geo...

There are two versions of Powerflex anti-roll-bar for the Renault Megane Mk2. The 20mm diameter ARB bushes fit the Megane RS-225 phase 1 and RS-225...

The Powerflex Handling Pack contains all the vital suspension upgrades at a discounted price. This kit for the Renault Megane RS225, RS230 R26 and ...

These Powerflex Rear Beam Mounting Bushes (PFR60-510 / PFR60-510BLK) are suitable for the Renault Megane Mk2 models. The Powerflex PFR60-510 bushes...

This Powerflex Lower Engine Mount Insert (PFF60-526 / PFF60-526BLK) is suitable for the Renault Megane Mk2 Sport models including the Renaultsport ...

SuperPro FRONT ARM REAR BUSH - RENAULT CLIO MK3 RS 197/200 These are Available in 3 versions:  - Standard Alignment  -Steering Pull Correction K...

REAR CHASSIS EXHAUST MOUNT BUSH Diagram Ref: 20 EXH020 EXH020 is designed to replace the usually broken internal rubber bush and fits into the orig...